2nd Shift Position - $1.25/hour shift differential
POSITION SUMMARY:
This position is responsible for the forming, cutting, sharpening, piercing, welding and/or the painting of fabricated materials for the use in a final product.
SKILL ( Education, Experience, Initiative and Ingenuity)
Must be able to take and successfully pass an appropriate Work Keys assessment
1-2 years' experience in area assigned to (Painting, Welding, Fabrication)
Ability to read and understand blueprints
Ability to work independently
Good understanding of basic shop math and measuring techniques
Expertise with basic hand tools, air tools, gages and torque wrenches
Expertise in using hoist and cranes
EFFORT (Physical Demand, Mental or Visual Demand)
Must have excellent natural or corrected vision
Job cannot be performed alternating sitting and standing
Requires ability to reach overhead, lift up to 26 pounds repeatedly, be on feet for long hours, stooping, bending, pulling and pushing
Must be capable of working independently using initiative and problems solving skills
RESPONSIBILIT Y (Equipment or Process, Material or Product, Safety of Others, Work of Others)
Read and understand moderately complex to very complex blueprints, wiring diagrams, bill of materials, and schematics.
Identifies discrepancies between customer requirements and finished product.
Performs visual check of completely finished product following customer specs and/or QC report procedure.
Performs highly complex troubleshooting and problems solving of electrical, electronic or electro-mechanical operations.
Determines cause of errors and establishes a game plan to remedy errors to make the product in conformance.
Interacts with Engineering on a regular basis to determine appropriate specifications when discrepancies arise.
Interacts with Assembly operations regarding problems with wiring assembly.
Makes minor to very complex adjustments and modifications to product.
Performs OHM check, input output, PLC, etc.
Utilizes PC's, PLC's, Universal Voltage Power Cart, Multi-Meter, Pulsar voltage and AMP
Generator, Injection Carts for Ground Fault, Dielectric Hi-Pot Tester, etc.
Provide training and guidance when new Testers to department.
Interacts with external Customers, Field Sales personnel and may participate in on-site testing certification.
Works closely with supervisor to ensure quality standards and shipment commitments are met.
Utilizes a wide variety of hand tools, air tools, and measuring equipment.
Continuously provides input to supervision, engineering, and quality groups relative to product improvement.
Establishes and maintains a safe and healthful working environment in accordance with OSHA requirements.
Performs other tasks as may be requested to assure the effective and continuous utilization of assets.
* Fabrication Shop:
Forms, cuts, and pierces metal to form fabricated assembly units
Performs a variety of operation to include but not be limited to :Cutting , Piercing, Forming, etc.
Utilizes a wide variety of hand tools, air tools, and measuring equipment
Operates moderately complex to very complex fabrication machinery, using digital/electronic controls
Responsible for movement of materials within the cabinet shop area
* Paint Booth:
Operates complex to moderately complex paint spraying equipment.
May be exposed to hazardous chemicals
Responsible for storage and care of chemicals
Mixes and prepares paint
Continuously loads and unloads parts
* Welding:
Performs moderately complex welding operations.
Utilizes a variety of welding equipment, ensuring all safety measures are used.
May be exposed to extreme temperatures and performs work in a confined area.
Moves parts in and out of Welding area
JOB CONDITIONS(Working Conditions, Hazards)
May use hazardous chemicals.
Safety shoes and safety glasses are required .
Hearing protection is required . Other specialized safety PPE such as face mask, gloves, apron, hard hat, face shields, and safety appropriate work clothing may also b e require d
Why us?
Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.
€34bn global revenue
128 000+ employees in 100+ countries
45% of revenue from IoT
5% of revenue devoted for R&D
You must submit an online application to be considered for any position with us. This position will be posted until filled
It is the policy of Schneider Electric to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.2nd Shift Position - $1.25/hour shift differential
POSITION SUMMARY:
This position is responsible for the forming, cutting, sharpening, piercing, welding and/or the painting of fabricated materials for the use in a final product.
SKILL ( Education, Experience, Initiative and Ingenuity)
Must be able to take and successfully pass an appropriate Work Keys assessment
1-2 years' experience in area assigned to (Painting, Welding, Fabrication)
Ability to read and understand blueprints
Ability to work independently
Good understanding of basic shop math and measuring techniques
Expertise with basic hand tools, air tools, gages and torque wrenches
Expertise in using hoist and cranes
EFFORT (Physical Demand, Mental or Visual Demand)
Must have excellent natural or corrected vision
Job cannot be performed alternating sitting and standing
Requires ability to reach overhead, lift up to 26 pounds repeatedly, be on feet for long hours, stooping, bending, pulling and pushing
Must be capable of working independently using initiative and problems solving skills
RESPONSIBILIT Y (Equipment or Process, Material or Product, Safety of Others, Work of Others)
Read and understand moderately complex to very complex blueprints, wiring diagrams, bill of materials, and schematics.
Identifies discrepancies between customer requirements and finished product.
Performs visual check of completely finished product following customer specs and/or QC report procedure.
Performs highly complex troubleshooting and problems solving of electrical, electronic or electro-mechanical operations.
Determines cause of errors and establishes a game plan to remedy errors to make the product in conformance.
Interacts with Engineering on a regular basis to determine appropriate specifications when discrepancies arise.
Interacts with Assembly operations regarding problems with wiring assembly.
Makes minor to very complex adjustments and modifications to product.
Performs OHM check, input output, PLC, etc.
Utilizes PC's, PLC's, Universal Voltage Power Cart, Multi-Meter, Pulsar voltage and AMP
Generator, Injection Carts for Ground Fault, Dielectric Hi-Pot Tester, etc.
Provide training and guidance when new Testers to department.
Interacts with external Customers, Field Sales personnel and may participate in on-site testing certification.
Works closely with supervisor to ensure quality standards and shipment commitments are met.
Utilizes a wide variety of hand tools, air tools, and measuring equipment.
Continuously provides input to supervision, engineering, and quality groups relative to product improvement.
Establishes and maintains a safe and healthful working environment in accordance with OSHA requirements.
Performs other tasks as may be requested to assure the effective and continuous utilization of assets.
* Fabrication Shop:
Forms, cuts, and pierces metal to form fabricated assembly units
Performs a variety of operation to include but not be limited to :Cutting , Piercing, Forming, etc.
Utilizes a wide variety of hand tools, air tools, and measuring equipment
Operates moderately complex to very complex fabrication machinery, using digital/electronic controls
Responsible for movement of materials within the cabinet shop area
* Paint Booth:
Operates complex to moderately complex paint spraying equipment.
May be exposed to hazardous chemicals
Responsible for storage and care of chemicals
Mixes and prepares paint
Continuously loads and unloads parts
* Welding:
Performs moderately complex welding operations.
Utilizes a variety of welding equipment, ensuring all safety measures are used.
May be exposed to extreme temperatures and performs work in a confined area.
Moves parts in and out of Welding area
JOB CONDITIONS(Working Conditions, Hazards)
May use hazardous chemicals.
Safety shoes and safety glasses are required .
Hearing protection is required . Other specialized safety PPE such as face mask, gloves, apron, hard hat, face shields, and safety appropriate work clothing may also b e require d
