PENDING CONTRACT AWARD

TASK DESCRIPTION:

Non-Destructive Inspection Technician (NDI) II, WG-3705-10: Inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Determines test method, and prepares fluids and parts for nondestructive inspection. Interprets nondestructive inspection test results, and provides information about defects to repair center. Analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action. Establishes radiation areas for radiographic operations. Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data. Performs nondestructive inspection on structures, components, and systems. Detects flaws such as cracks, de-laminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operates, maintains, and inspects nondestructive equipment. Performs operator maintenance and service inspections on shop equipment and tools. Ensures lock out and tag out procedures are accomplished prior to maintenance on equipment. Performs silver recovery functions. Handles and disposes of hazardous waste and materials. Completed initial Non Destructive Inspection Training Course and maintains basic qualification.

Skill and Knowledge:  Shall have the ability to perform Non-Destructive Inspections on various aircraft, aircraft components and sub-components in support of Intermediate and Depot Level maintenance.

Responsibility:   Performs requirements in accordance with the procedures established in the PWS. Specifically performs scheduled and unscheduled NDI inspections on assigned aircraft engines/AGE equipment IAW the designated maintenance manuals. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives.  Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform.

Task Requirements:

1. Performs Non-Destructive Inspections in support of aircraft Organizational Level  maintenance functions utilizing, Eddy Current, Liquid Penetrant, Magnetic Particles, and Ultrasonic Testing


2. Scheduled and unscheduled maintenance support 


3. Performs inspection, disassembly, repair, servicing, TD compliance, modification, assembly, corrosion control, preservation/depreservation


4. Maintain aircraft and aeronautical equipment to continuously support the assigned readiness posture outlined in in the activities plan and daily flight schedule


5. Aircraft maintenance action documentation via logs, records, forms, and electronic means


6. Use hand tools, power tools, machines, specific and general aviation test measurement and diagnostic equipment, and sets kits and outfits (SKO).


7. Inspect aircraft components/sub components.


8. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.


9. Confined space operations to include fuel cell entry


10. Support Equipment (SE) operation and inspections


11. Support services


12. Corrosion Control


13. Preservation and depreservation


14. General aircraft maintenance


15. Technical Directive compliance and modifications


16. Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment


17. Perform shift work and/or overtime as required


18. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections.


19. Requisition repair parts, materials, and consumable supplies through military supply system.


20. Perform other tasks as directed.

Preferred Qualifications:

1. Non-Destructive Inspection (NDI) Level III qualification for Eddy Current, Liquid Penetrant, Magnetic Particles, and Ultrasonic Testing disciplines


2. Five or more years’ experience


3. Seven or more years’ rotary wing maintenance experience


4. Familiarity and ability to use IETMS.


5. Basic Corrosion Control Course


6. Advanced Corrosion Control Course/Paint and Final Finish

Basic Qualifications:

1. Non-Destructive Inspection (NDI) Level II qualification for Eddy Current, Liquid Penetrant, Magnetic Particles, and Ultrasonic Testing disciplines


2. Three years NDI experience


3. Must be able to work shift schedules as required per Performance Work Statement (PWS)


4. Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS


5. Must be able to pass a background check


6. Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position


7. Must be able to climb ladders, raised platforms, and aircraft


8. Must be able to use hand and power tools


9. Must have dexterity to handle small parts


10. Must be able to pass employment physicals


11. Must be able to deploy to support off station exercises and perform other support duties if required

Employment is contingent on a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract.

See Job Description